Shop Zebra Mounts

Shop by Zebra Device

Custom built solutions, vehicle docks, and ModTek mounts — find yours by Zebra device family.

Custom Built Zebra Solutions Mounting Devices Since 1994 Volume Pricing (10+ Units) Free U.S. Shipping
Shop ModTek for Zebra View All Zebra Mounts
Why ProClip + Zebra

Built for Zebra. Built for Scale.

Generic holders can't accommodate Zebra's rugged form factors. ProClip builds device-specific mounts and charging cradles for the TC, ET, EM, and MC series — keeping devices powered and accessible all shift.

Generic Mount Problems

Universal Holders Fall Short

Off-the-shelf mounts create real friction in Zebra fleet environments:

  • Universal holders don't support Zebra's pistol-grip and scan-engine form factors
  • No integrated charging means devices die mid-shift in high-demand scan workflows
  • Full mount replacement required at every TC and ET upgrade cycle
  • Inconsistent fit across mixed handheld and tablet Zebra fleets

ProClip Zebra Payoff

Every Series. Every Shift.

ProClip delivers fit, power, and standardization for the full Zebra lineup:

  • Custom-fit holders for TC, ET, EM, and MC series — handhelds and tablets
  • Charging cradle options keep devices powered through all-day scanning shifts
  • ModTek system reduces upgrade cost — swap the case, keep the vehicle bracket
  • Standardize across mixed Zebra fleets — vehicles, forklifts, carts, and fixed stations
ProClip cradle for Zebra ET401 rugged tablet in a Kenworth T680 truck cab
ProClip mount for Zebra EM45 enterprise mobile on a mobile workstation cart
ProClip holder for Zebra 3600 Series scanner at a warehouse workstation
ProClip ModTek dock for Zebra ET40 ET45 tablet in a Ford Transit van
ProClip mount for Zebra ET60 ET65 tablet at warehouse racking

ModTek™ System

Swap the Case.
Keep the Dock.

Built for Zebra fleets on a refresh cycle: the rugged case stays on the device, the USB-C dock stays in the vehicle. When the next generation arrives — only the case changes.

ProClip ModTek hard case on a Zebra ET401 tablet — stays on the device at all times

Part One

The ModTek Hard Case

A rugged case built for your Zebra model. Stays on the device and clicks into any ModTek dock.

ProClip ModTek USB-C dock for the Zebra ET401 — mounts permanently in the vehicle

Part Two

The USB-C Dock

A USB-C dock that mounts in the vehicle and fits every Zebra ModTek case — fast charging, locked-in fit.

No Rip & Replace

Upgrade from TC52 to TC58, or ET40 to ET60, without rebuilding vehicle mounts. Only the case changes — saving fleet time and hardware cost at every Zebra refresh.

USB-C Fast Charging

Hard-wired USB-C power keeps Zebra handhelds and tablets charged through every full shift — no batteries, no loose adapters, no interruptions to operations.

Secure Click-Lock Fit

The ModTek case clicks into the dock with a positive lock — holding Zebra devices firmly through vibration, repeated docking cycles, and demanding warehouse environments.

Fleet-Scale Upgrade Path

Standardize the ModTek dock across your entire Zebra fleet. When the next TC or ET arrives, only the case swaps — across every vehicle at a fraction of full rip-and-replace cost.

ProClip ModTek case and dock holding a Zebra EM45 enterprise mobile
ModTek in Action

Zebra EM45 · ModTek Case + Dock

Shop Zebra ModTek Cases Request a Fleet Quote
Ready to Deploy

Put ProClip to Work
for Your Zebra Fleet.

The mounts, the ModTek system, and the B2B expertise to get your Zebra fleet configured and shipping fast.

Configuration Tool Select your vehicle, Zebra device, and duty level. Our guided tool builds your exact part combination — cradle, mount arm, and vehicle bracket — and generates a ready-to-submit parts list in minutes. Build Your Mount
Get a Quote Fleet pricing, volume discounts, and ModTek deployment planning available for B2B accounts. Talk to a ProClip specialist — we'll quote your entire Zebra deployment, not just the hardware. Request a Quote

FAQ

Common Questions from Warehouse & Fleet Operations Managers

Answers for teams standardizing Zebra TC, ET, EM, and scanner mounts across warehouse and fleet operations.

What happens to our vehicle mounting infrastructure when we upgrade from one Zebra TC or ET generation to the next?

With the ProClip ModTek system, you don't rebuild the install. The dock stays mounted in the vehicle — you swap the hard case for the new Zebra model and click it into the same dock.

On standard cradle mounts, the vehicle bracket stays put while only the device-specific cradle changes. Either way you avoid full rip-and-replace, and the upgrade becomes a few minutes per device.

We run TC handheld computers and ET tablets across different teams in the same facility. Can one mounting strategy support both?

Yes — that's exactly what ProClip's modular approach is for. TC handhelds and ET tablets use device-specific cradles or ModTek cases on a common bracket standard, so your vehicle infrastructure stays consistent even when devices differ across teams.

  • Standardize vehicle bracket types across forklifts, trucks, and workstations.
  • TC holders for picking and scanning teams; ET cradles for vehicle-mounted route teams.
  • Simplify procurement, spares, and servicing across the whole Zebra fleet.
Will ProClip charging cradles keep Zebra TC and ET devices powered through a full shift in a forklift or fleet vehicle?

Yes — charging reliability is a core requirement. ProClip charging cradles and ModTek USB-C docks power Zebra devices through a hard-wired vehicle connection for consistent charge all shift — no batteries or adapters.

Cradles are custom-fit to the device, keeping port access, scanner windows, and cable routing clean and secure in the cab or on the forklift mast.

Our Zebra devices operate in harsh environments — forklifts, loading docks, and outdoor vehicles. Will these mounts hold up?

Yes. Harsh commercial environments are exactly what ProClip mounts are built for. ProClip hardware is engineered for the vibration, repeated docking cycles, and temperature swings of warehouse and fleet operations.

  • Standard-duty and heavy-duty forklift clamp mounts for different load needs.
  • Vibration-resistant construction keeps devices secure and readable in high motion.
  • Configurations for forklifts, fleet vehicles, carts, pedestals, and workstations.

For specialized installs — non-standard vehicles, mixed hardware, or multi-site rollouts — ProClip's team can help define the right configuration before you buy.

ProClip offers mounts for many Zebra models — how do I know which cradle fits my specific TC or ET variant?

Use the Quick Finder at the top of this page — pick your device type, then your exact model, and it links straight to the right collection.

For complex configs — chassis, vehicle type, charging vs. non-charging, locking — the Mount Configuration Tool builds a complete parts list, and our B2B team can spec large multi-site deployments directly.