Standard-Duty Mounts
A ball-and-socket design for quick, tool-light positioning on round, square, or rectangular cage bars. Ideal for handhelds and lighter devices up to 25 lbs.
Shop Standard-DutyForklift & Warehouse Mounting Systems
Devices Stay Put. Your Warehouse Keeps Moving.
ProClip specializes in precision mounting systems for rugged tablets, barcode scanners, warehouse computers, and mobile workflow devices — keeping forklift operators productive and inventory operations running without interruption.
Custom built solutions for
Solutions for Every Warehouse Workflow
ProClip has a purpose-built mounting solution for every station, vehicle, and workflow on your floor.
Forklift Fleets
Forklift-Mounted Tablets & Scanners
Keep rugged tablets, scanners, and printers locked in the operator's sightline through the vibration and shock of forklift work. Purpose-built brackets eliminate bounce and rattle so real-time data stays readable all shift.
Shop Forklift Mounts
Pick · Pack · Scan
Pick, Pack & Scan Workflows
Hold scanners and tablets at the optimal angle so every pick, pack, and count happens at the point of work. ProClip mounts cut reach distance and misreads, lifting first-scan read rates and cycle-count accuracy.
Shop Barcode Scanner Mounts
Fixed Workstations
Mounted Workstations for Every Station
Give every receiving dock, packing table, and shipping station a clean, secure device location. AMPS-compatible bases accept pedestal, desk, surface, or rail arms for a precision deployment at any work cell.
Shop Tablet & Device Mounts
Fulfillment & DC
Fulfillment & Distribution at Scale
Standardize one mounting ecosystem across forklifts, dock stations, and carts to cut SKU complexity and simplify reordering. ProClip keeps every station running through device refresh cycles with the ModTek Case & Dock System.
Shop Universal Tablet Mounts
Cart Fleets
Cart-Mounted Mobile Devices
Hold devices securely through floor transitions, tight aisle turns, and constant docking. ProClip cart mounts — including our own INOVATIV mobile cart systems — take the daily grind while allowing fast, one-handed removal when operators move to a fixed station.
Shop Mobile Cart MountsNeed a custom configuration? ProClip covers thousands of device and mounting configurations.
Built to Mount on Any Forklift
ProClip forklift mounts are engineered to fit nearly every type of forklift, including those with round, square, or rectangular cages. They provide secure mounting bases for tablets, scanners, and keyboards in tough warehouse environments.
Medium-Duty Mounts
Reinforced clamping system for tablets, larger scanners, and mid-weight devices. Greater rigidity than standard while still allowing repositioning across shifts.
Shop Medium-Duty
Heavy-Duty Mounts
Solid-core aluminum with 30 interlocking teeth locks tight against vibration and impact — rated to support devices up to 300 lbs in the most demanding environments.
Shop Heavy-Duty
Accessories
Power converters, VESA-to-AMPS adapter plates, swiveling top support arms, vibration dampers, and steel extension plates to complete the installation.
Shop AccessoriesThe ProClip Difference
Off-the-shelf suction cups and generic mounts are built for cars — not for 8-hour forklift shifts, vibrating warehouse floors, and industrial scan environments.
ProClip
Custom Built for Your Warehouse
Why industrial operations choose ProClip warehouse mounting solutions
- Precision-machined brackets anchor permanently to vehicle structure
- Positive-lock mechanism holds through every forklift cycle
- Locking holder prevents dislodgement through dock transitions and floor irregularities
- Custom built holders engineered around specific device dimensions and ports
- Integrated cable management routes clean — passes safety and compliance audits
- ModTek system: swap the case in minutes, keep the dock permanently mounted
- Net-30, PO billing, dedicated fleet account manager for 10+ unit deployments
- Engineered for industrial environments. Field-proven for 20+ years.
Off-the-Shelf
Generic Mounts
What warehouses accept when using universal solutions
- Suction cups fail within days on vibrating forklift surfaces
- Ball joint mounts slip out of position mid-shift
- Device falls mid-aisle — creating a safety incident and downtime
- One-size-fits-all holders damage device ports and charging connectors
- Exposed cable runs across workstations — OSHA trip hazard
- Device refresh requires full remounting across every vehicle in the fleet
- No enterprise pricing, no fleet accounts, no volume support
- Generic brand — not engineered for warehouse-scale operations
See how ProClip replaces generic mounting across your operation. → Get a Fleet Assessment
Swap the Case.
Keep the Dock.
The dock mounts once. When your device fleet upgrades, only the case changes — keeping every station and forklift operational with zero reinstallation labor.
Part One
The ModTek Hard Case
A rugged, drop-tested case sized to your device. It stays on the device and clicks into any ModTek dock.
Part Two
The ModTek Dock
A USB-C dock that mounts permanently to the forklift bracket or workstation and fits every ModTek case — power, data, and a locked-in fit.
-
5 Gbps USB-C Transfer Speed
-
6 ft Drop Tested
-
20K USB-C Insertion Cycles
Universal Mounting vs. ModTek System
| Challenge | ProClip ModTek | Universal Mounting |
|---|---|---|
| Hardware refresh process | Only the case changes on refresh | Full reinstallation required per device refresh |
| Device generations | One dock spans multiple device generations | New brackets required per device generation |
| Time per unit | A few minutes per unit to swap | 2–4 hours per unit for full refresh |
| Labor requirement | Operator self-service case swap | IT truck rolls required for every refresh |
| Cost at scale | Minimal labor — savings scale with fleet size | High labor cost compounds at scale |
Ready to Deploy
Put ProClip to Work
Put ProClip to Work
for Your Warehouse.
Whether you're mounting scanners on five forklifts or deploying tablets across a hundred pick-and-pack stations — ProClip has the hardware, the ModTek system, and the B2B expertise to get your warehouse configured and shipping fast.
Configuration Tool
Select your equipment type, device, and mounting position — forklift, cart, or fixed workstation. Our guided tool builds your exact part combination and generates a ready-to-submit parts list in minutes.
Build Your Mount
Get a Quote
Large warehouse deployment? Our enterprise team will audit your operation, spec a complete mounting solution, and provide volume pricing for rollout across your entire floor — with Net-30 and PO billing available.
Request a Quote
Warehouse Mounting Questions, Answered
Common questions from warehouse and distribution operations standardizing forklift, workstation, and scanner mounts across the floor.
Why do suction cup mounts fail in warehouses?
Suction cups cannot maintain adhesion on the vibrating surfaces of forklifts and warehouse equipment. Forklift operation generates continuous vibration loads that cause suction cups to fail within days. ProClip precision-machined brackets anchor permanently to vehicle structure, holding position through every shift.
What mounting systems work best for forklift tablets?
Purpose-built forklift mounting systems with positive-lock holders anchored to the vehicle structure are required. ProClip forklift mounts are compatible with Crown, Toyota, Hyster, Yale, Raymond, Jungheinrich, and Combilift equipment, and support Zebra ET4x/ET5x, Honeywell CK/CT, and Samsung Galaxy Tab Active series devices.
How does ProClip reduce device refresh costs in warehouse fleets?
The ProClip ModTek Case & Dock System keeps the dock permanently mounted to the forklift or workstation bracket. When devices are refreshed, only the case swaps — no reinstallation, no tools, a few minutes per unit. A 100-unit device refresh becomes a same-shift operation instead of days of reinstallation.
Does ProClip offer volume pricing for warehouse deployments?
Yes. ProClip offers volume pricing for deployments of 10 or more units, along with fleet accounts, Net-30 and PO billing, dedicated enterprise account management, and multi-site rollout coordination.
Which device brands does ProClip support for warehouse mounting?
ProClip supports rugged devices from Zebra (ET, TC, MC, EM series), Honeywell (CK, CT, CN), Samsung (Galaxy Tab Active, XCover), Apple (iPad, iPhone), Lenovo, and Getac — thousands of device-and-mount configurations across forklifts, workstations, carts, and vehicles.
Do ProClip mounts hold up in cold storage and temperature extremes?
Yes. ProClip holders are built for the temperature swings, vibration, and impact of industrial environments — from sub-zero cold storage to hot staging areas and high-traffic dock doors.
Can ProClip mount barcode scanners and mobile printers, not just tablets?
Yes. ProClip offers mounts and holsters for Zebra 3600 Series and DS3600 scanners, RFID sleds, and ZQ-series mobile printers alongside tablet and handheld holders, so an entire warehouse device mix runs on one mounting system.
Still have questions about your operation? Get a Fleet Assessment →
Build Your Warehouse Setup