Standard-Duty Mounts
A ball-and-socket design for quick, tool-light positioning. Ideal for handhelds and lighter devices up to 25 lbs in cab and cargo area deployments.
Shop Standard-DutyMounts for Fleet and Transportation
Your Devices
Stay Put.
Your Fleet
Keeps Moving.
Purpose-built vehicle mounting systems for ELD devices, fleet tablets, GPS units, and dispatch hardware — keeping drivers compliant and focused across every route.
Custom built solutions for
From long-haul semi cabs to last-mile delivery vans
ProClip has a custom built mounting solution for every vehicle in your operation.
Class 7–8 OTR
Long-Haul Semi & Class 8
Kenworth, Peterbilt, Freightliner, Volvo, and Mack cab mounts for ELD devices, fleet tablets, and GPS units. Custom built base plates anchor permanently with zero movement at highway speed.
Shop Class 7–8 Mounts
Last-Mile
Delivery Vans & Sprinters
Ford Transit, Mercedes Sprinter, and RAM ProMaster mounts for route tablets, handheld scanners, and dispatch devices. Custom built base plates install with no drilling — clean, reversible, and lease-return friendly.
Shop Delivery Van Mounts
Field Fleet
Work Trucks & Pickups
Ford F-150/250/350, RAM 1500/2500/3500, and Chevy Silverado mounts for phones, rugged tablets, and field devices — in console or dash positions. Built for utilities, telecom, construction, and public safety fleets.
Shop Work Truck Mounts
Class 4–6
Medium-Duty & Box Trucks
Freightliner M2, Isuzu NPR/NRR, and Ford E-Series cab mounts for ELD devices and fleet tablets, in pedestal or console positions. Integrated cable routing helps meet DOT clean-cab requirements.
Shop Medium-Duty Mounts
Heavy Cab
Pedestal & Arm Mounts
Heavy-duty pedestal systems for large tablets and rugged devices, engineered to resist heavy lateral force. Built for semi cabs, vocational vehicles, and specialty equipment where dash or console mounts aren't viable.
Shop Pedestal MountsDon't see your vehicle? ProClip covers 400+ makes and models.
The ProClip Difference
Generic vehicle mounts are built for no vehicle in particular. ProClip is engineered for yours. The difference shows at highway speed.
ProClip
Custom Built Solutions
Custom Built Solutions
for Your Fleet
Why transportation fleets choose ProClip fleet device mounts
- Vehicle-specific base plates anchor permanently — zero movement at highway speed
- ELD mount and fleet tablet mount holders engineered to exact device dimensions — no play, no damage
- ModTek delivers vehicle-tapped USB-C power directly at the commercial vehicle mount position
- Tilt-and-swivel adjustability — set once per driver per vehicle, locked in place
- Protective dispatch hardware mount design preserves all ports, cameras, and speaker grilles
- Single clean vehicle mounting system — no stacks, no adapters, deployment-ready out of the box
- One SKU scales across 400+ vehicle makes — standardized across your entire fleet
Off-the-Shelf
Generic Fleet Mounts
What fleets tolerate when using universal solutions
- Mounts shift, rattle, and fail under commercial-route vibration
- Suction cups lose grip in extreme cab temperatures — devices fall while driving
- No integrated power — tangled cable runs that violate DOT cab standards
- Wrong device angle creates driver glare and distraction hazards
- Generic fits damage device housings, ports, cameras, and speaker grilles
- Multi-piece adapter stacks create failure points and add cab bulk
- Impossible to standardize across mixed vehicle makes and model years
Ready to stop compromising? Find your custom built fleet solution →
Fleet Pedestal Mounts
ProClip pedestal systems bring duty-rated mounting performance to every vehicle in your fleet — secure, vibration-resistant positioning for tablets, scanners, and handhelds in any cab or cargo area.
Medium-Duty Mounts
Reinforced clamping system for route tablets and mid-weight scanners. Greater rigidity than standard — holds secure through constant road vibration and cab movement.
Shop Medium-Duty
Heavy-Duty Mounts
Solid-core aluminum with 30 interlocking teeth — locks tight at highway speed. Built for heavy ruggedized tablets and devices that require maximum stability across long-haul routes.
Shop Heavy-Duty
Accessories
Power converters, VESA-to-AMPS adapter plates, swiveling top support arms, vibration dampers, and extension plates to complete any fleet pedestal installation.
Shop Accessories
Swap the Case.
Keep the Dock.
With ModTek, the dock is a one-time investment. As devices evolve, simply swap the case no dock replacement, no vehicle reinstallation.
Part One
The ModTek Hard Case
A rugged, drop-tested case sized to your device. It stays on the device and clicks into any ModTek dock.
Part Two
The ModTek Dock
A USB-C dock that mounts permanently in the vehicle and fits every ModTek case — power, data, and a locked-in fit.
-
5 Gbps USB-C Transfer Speed
-
6 ft Drop Tested
-
20K USB-C Insertion Cycles
ModTek vs. Traditional Fleet Mounting Systems
| Criteria | ProClip ModTek | Traditional Mounts |
|---|---|---|
| Hardware Refresh | Swap the case only — dock stays in the vehicle | Full system removal and reinstallation required |
| Device Swap Time | Minutes per vehicle, no tools required | 2–5 days of downtime per vehicle |
| Installation | Internal staff only — dock installed once, never removed | Professional installer required at every refresh cycle |
| Fleet Lifecycle | Dock never replaced — supports multiple device generations | Full system replacement every 2–3 years |
| Total Cost | Low — no recurring install labor, minimal downtime | High — repeated labor, replacement hardware, lost route time |
Ready to Deploy
Put ProClip to Work
Put ProClip to Work
for Your Fleet.
Whether you're mounting ELD devices in three service trucks or deploying tablets across three hundred long-haul rigs — ProClip has the hardware, the ModTek system, and the B2B support to get your fleet configured and shipping fast.
Configuration Tool
Select your vehicle make, model, and year, then pair it with the right device holder and ModTek power option. Our guided tool builds your exact part combination and generates a ready-to-submit parts list in minutes.
Build Your Mount
Get a Quote
Large deployment? Our fleet team will spec your full solution, provide volume pricing, and coordinate rollout across every vehicle type in your operation — with Net-30 and PO billing available for qualified accounts.
Request a Quote
Fleet Mounting Questions, Answered
Common questions from transportation fleet managers standardizing ELD, tablet, and dispatch device mounts across commercial vehicles.
Why do suction cup mounts fail in commercial vehicles?
Suction cups lose grip under continuous commercial-route vibration and extreme cab temperatures, and devices can fall while driving. ProClip vehicle-specific base plates anchor permanently to the cab interior, holding position with zero movement at highway speed.
Do ProClip mounts help meet DOT clean-cab requirements?
Yes. Integrated cable routing keeps cords contained instead of running loose across the cab, which helps fleets meet DOT clean-cab requirements and reduce driver distraction. ModTek can deliver vehicle-tapped USB-C power directly at the mount position.
How does ProClip reduce device refresh costs across a fleet?
The ProClip ModTek Case & Dock System keeps the dock permanently installed in the vehicle. When the fleet refreshes hardware, only the case swaps — no reinstallation, no tools, no vehicle downtime, so a fleet-wide refresh takes minutes per vehicle instead of days.
How many vehicle makes and models does ProClip support?
ProClip covers 400+ vehicle makes and models. One standardized mounting system scales across mixed fleets, so a single SKU approach works whether you run long-haul semis, delivery vans, or work trucks.
Does ProClip offer volume pricing for fleet deployments?
Yes. ProClip offers volume pricing for deployments of 10 or more vehicles, along with fleet accounts, Net-30 and PO billing, a dedicated fleet account manager, and multi-vehicle-type rollout coordination.
Still have questions about your fleet? Talk to a fleet specialist →
Build Your Fleet Solution